Semi Automatic Tin Tie Applicator

The Semi Automatic Tin Tie Applicator is available in the 2200 Series (pictured) and the 2500 Series. The LX2200 and RX2200 tin tie machines place .315″ wide, double wire tin tie, on bag faces of filled bags. Filled bags would normally be pre-sealed. The tin tie is applied using a hot melt adhesive. The 2500 Tin Tie Machine places .315″ wide, double wire tin tie on bag faces of filled bags. Filled bags would normally be pre-sealed, and as with the 2200 Series, the tin tie is applied using a hot melt adhesive. The tie ends extending past the edge of the bag are then automatically bent around the bag neck for a finished look.

Request a Quote

Features

  • Fully adjustable floor stand to adjust machine height
  • Nordson hot melt adhesive system
  • Single spool payout system to accept 6000 foot spools of .315” wide 23 or 24 guage “tin tie”
  • Automatically applies tin tie and adjusts tab length to bag face width
  • High Speed Programmable Logic Controller
  • Right or left hand directional feed
  • Continuous motion for smooth flow
  • Made in America

Specifications

  • Electrical 240 VAC, 15 AMP 1 phase
  • Pneumatic 80 psi
  • Wired to National Electrical Code
  • Bag face width range 3 to 12 inches
  • Bag height range 4 to 18 inches
  • Bag thicknesses up to 6 inches
  • Patent number 4,420.355
  • Tie tab length from 0.8 to 1.2 inches
  • 80 bags per minute with 5 inch tie length
  • Standard 34 inch height mounted conveyor

Additional Options

  • Different voltages upon request

Resources

Contact Us for a Quote on this Machine